06-13-2015, 12:23 PM
(This post was last modified: 06-17-2015, 03:53 PM by honkytonkman.)
_________________
after some trying i've found that freezing reasons in my patch were not by this tutorial..i think
method is working , NOT THE BEST .. but not the last
______________________
ok folks, now i tell you how to add a second attire for your favourite wrestler
in
svr 2009 PSP. i think it's the first tutorial about it for SVR 09
THINGS YOU NEED:
-ids of 09 wrestlers
-hex editor
-valid file adder
WARNING: it's a little complicated for noobs..but not impossible.
another thing: in 09 you can add a second attire using only the slots of
wrestlers having already 2..so you have to sacrifice one wrestler with 2 attires if you
wanna give another one to your favorite..the wrestler with 2 ,will stay only with one,of course..
let's start:
exemple: i wanna give a second attire to PAUL LONDON ..
he stands in ch3 at CE01 -CE 11 (ring/ entrance).
i open MISC.pac and with hex editor a search COS..
now look well the lines down..you will see these ids about wrestlers with 2
attires
68: jericho
7B: mysterio
6B : punk
C9 : santino
i choose santino id for my london's second attire..(id C9)
i change with hex editor C9 into cE.. (CE london's id) then i save .
now with hex i open ch3.pac and i search EMD3.
i search down the second attires of the wrestler i wanna sacrifice..in this case
santino..the ids are C911 and C912 (ring/entrance)
with hex i change
C911 in CE11 and
C912 in CE12...
confused ? i know..
CE in id of london..if i wanna add a second attire i need to call the
santino second attire ids with CE ! ..number stay the same (11/12) ..OK?
after save.
now i do same thing with
plistpsp (arc)
i open with hex ,i search EMD3
and i replaced
C911 in CE11 and
C912 in CE12...
ok..now i open again ch3.pac
and using the VALID FILE ADDER tool ,
i add in ch3
the two pac files of the second
london textures (i had created before)of course called CE11 and CE12.
i copy the XX and YY for every single pac (CE11-CE12)
and i put it in ch3.EMD
and in EMD3 in plistpsp ,updating ARC.
PS: for this last part if you have doubts see the cenz tom tutorials.
now i can rebuild ISO .
in this case LONDON will have a second attire
and of course santino will stay with one.
NOTE: in you have preload pac actived..you don't have to
do things in MISC.pac but in PRELOAD..
open preload pac in hex and search COS ,same way as in misc.pac.
this method longer and hard but it works in svr 09.
of course you can add second attire to anywrestler you like..
i used london only for exemple.
noobs can have some problems to find ids of wrestlers..i know..but
with a little practice and passion can do it.
THIS METHOD I SUPPOSE CAN WORK ALSO FOR PS2..
after some trying i've found that freezing reasons in my patch were not by this tutorial..i think
method is working , NOT THE BEST .. but not the last
______________________
ok folks, now i tell you how to add a second attire for your favourite wrestler
in
svr 2009 PSP. i think it's the first tutorial about it for SVR 09
THINGS YOU NEED:
-ids of 09 wrestlers
-hex editor
-valid file adder
WARNING: it's a little complicated for noobs..but not impossible.
another thing: in 09 you can add a second attire using only the slots of
wrestlers having already 2..so you have to sacrifice one wrestler with 2 attires if you
wanna give another one to your favorite..the wrestler with 2 ,will stay only with one,of course..
let's start:
exemple: i wanna give a second attire to PAUL LONDON ..
he stands in ch3 at CE01 -CE 11 (ring/ entrance).
i open MISC.pac and with hex editor a search COS..
now look well the lines down..you will see these ids about wrestlers with 2
attires
68: jericho
7B: mysterio
6B : punk
C9 : santino
i choose santino id for my london's second attire..(id C9)
i change with hex editor C9 into cE.. (CE london's id) then i save .
now with hex i open ch3.pac and i search EMD3.
i search down the second attires of the wrestler i wanna sacrifice..in this case
santino..the ids are C911 and C912 (ring/entrance)
with hex i change
C911 in CE11 and
C912 in CE12...
confused ? i know..
CE in id of london..if i wanna add a second attire i need to call the
santino second attire ids with CE ! ..number stay the same (11/12) ..OK?
after save.
now i do same thing with
plistpsp (arc)
i open with hex ,i search EMD3
and i replaced
C911 in CE11 and
C912 in CE12...
ok..now i open again ch3.pac
and using the VALID FILE ADDER tool ,
i add in ch3
the two pac files of the second
london textures (i had created before)of course called CE11 and CE12.
i copy the XX and YY for every single pac (CE11-CE12)
and i put it in ch3.EMD
and in EMD3 in plistpsp ,updating ARC.
PS: for this last part if you have doubts see the cenz tom tutorials.
now i can rebuild ISO .
in this case LONDON will have a second attire
and of course santino will stay with one.
NOTE: in you have preload pac actived..you don't have to
do things in MISC.pac but in PRELOAD..
open preload pac in hex and search COS ,same way as in misc.pac.
this method longer and hard but it works in svr 09.
of course you can add second attire to anywrestler you like..
i used london only for exemple.
noobs can have some problems to find ids of wrestlers..i know..but
with a little practice and passion can do it.
THIS METHOD I SUPPOSE CAN WORK ALSO FOR PS2..
